|Booster Gain:||68±2dB||Booster Power:||17--20dBm|
|Frequency Range:||890-915MHz，935-960MHz||Connector Type::||SMA/F|
|Material:||Zinc Alloy ,Plastic||Booster Bandwidth:||Wide Range,Supports 10MHz From 0.2 To 10MHz Bandwidth Adjusted|
|Support Network:||2G Voice||Trademark:||ATNJ|
900MHz Cell Tower Signal Booster,
ALC AGC Cell Tower Signal Booster,
900MHz Mobile Tower Booster
2G Voice 900MHz Cell Tower Signal Booster With ALC AGC Function
Mobile Signal Booster Repeater Amplifier Cell Tower Signal Booster 2G
GlobaL application ATNJ factory 900MHz 2G signal repeater for your selection:
GSM 900MHz 2G Pico repeater is applied specifically in small area indoor DAS system. The base station signal is coupled and amplified by Pico repeater into in building system. The amplified signals is transmitted by indoor antenna. Meanwhile the indoor antenna receives the cell phone signal, and send the signal to the base station as uplink. This method can eliminate the signal dead spot, reject the interference, provide the stable signal communication for cell phone users. This Pico repeater mainly solves the problem spot problem in building. The coverage area is as large as 3000 square meters in open space, and 1000 square meters in partial obstacle area, 500 square meters in complete obstacle area. The edge power level for coverage area is above 85dBm. The repeater output power level is less than 20dBm.
Pico Repeater is a bi-directional amplifier that allows for the reception of signals, amplifies the signal and re-transmits into areas where there is no or very low signal level coverage enabling a mobile user to establish a call connection.
Pico Repeater can be deployed in indoor coverage and dead area. It is especially advantageous to use in 100M2-1000M2,which is a very economical solution. The output power is up to 20dBm per carrier.
Meanwhile, it can also boost the speed of GPRS.
|Wide Range,Supports 10MHz from 0.2 to 10MHz bandwidth adjusted|
|Certification:||ISO, RoHS, CE|
Contact Person: Emmy Song