WCDMA GSM Pico ICS Repeater
| Power Supply: | AC100-240V In, DC12V3A Out | Network Protocols: | TETRA/P25/DMR/GSM/WCDMA/LTE/NR/WiFi |
| Weight: | ≦ 1.5kgs | Max. Gain: | Uplink: 65±2 DB | Downlink: 75±2 DB |
| Frequency Support: | Band8 900MHz+ Band1 2100MHz | Dimensions: | 190*170*80mm |
| Output Power: | Uplink: 17±1 DBm | Downlink: 17±1 DBm | Noise Figure: | ≦ 6 DB |
| RF Connector: | 2*build-in Antenna,2*SMA-female(switchable) | ||
| High Light: | WCDMA GSM repeater with ICS,Band selective repeater for GSM,Pico repeater with WCDMA support |
||
Advanced digital repeater solution for enhanced mobile network coverage and performance.
| Parameter | Band 8 (900MHz) | Band 1 (2100MHz) |
|---|---|---|
| Frequency Range (adjustable) | UL: 880-915MHz DL: 925-960MHz |
UL: 1920-1980MHz DL: 2110-2170MHz |
| Number of Sub-bands | 1-2 | 1-2 |
| Bandwidth (adjustable) | 5-20MHz | 5-20MHz |
| Max. Gain | UL: 65±2 dB DL: 75±2 dB |
UL: 65±2 dB DL: 75±2 dB |
| Manual Gain Control | 0-30 dB in step of 1 dB | |
| Automatic Gain Control | ≥ 20 dB | |
| Pass Band Ripple | ≤ ±2 dB | |
| Echo Cancellation | 25dB | |
| Spurious Emission | Comply with 3GPP TS36.106 | |
| Gain Flatness (per sub-band) | ≤ ±3 dB (peak-to-peak) | ≤ ±3 dB (peak-to-peak) |
| Max. Input Power Without Damage | 0 dBm | |
| Output Power | UL: 17±1 dBm DL: 17±1 dBm |
UL: 17±1 dBm DL: 17±1 dBm |
| Out of Band Gain | 2.5 ≤ f_offset_CW < 5.0 MHz: ≤60 dB 5.0 ≤ f_offset_CW < 10.0 MHz: ≤45 dB 10.0 MHz ≤ f_offset_CW: ≤35 dB |
|
| ACRR | ±20/100MHz: ≤-36dBc/30KHz ±40/200MHz: ≤-40dBc/30KHz |
±20/100MHz: ≤-36dBc/30KHz ±40/200MHz: ≤-40dBc/30KHz |
| EVM | LTE ≤ 8% | |
| Frequency Stability | ≤ ±0.01 ppm | ≤ ±0.01 ppm |
| Noise Figure | ≤ 6 dB | |
| VSWR | ≤1.8 | |
| System Delay | ≤ 4.5 µs | |
| RF Connector | 2*build-in antenna, 2*SMA-female (switchable) | |
| Impedance | 50 Ω | |
| Power Supply | AC100-240V in, DC12V3A out | |
| Power Consumption | ≤ 30W | |
| Dimensions | 190*170*80mm | |
| Weight | ≤ 1.5kgs | |
| Humidity | 5% to 95% | |
| MTBF | >50000 hours | |
| Installation | Wall or pole mount | |
| IP Rating | Indoor IP40 | |
| Operating Temperature | -10°C to 55°C | |
| Control & Monitoring | Local: USB with APP | Remote: LTE modem |
| Frequency Band | Downlink (Tx) | Uplink (Rx) | Output Power |
|---|---|---|---|
| VHF | 136-174MHz | 136-174MHz | 17dBm |
| UHF | 450-512MHz | 450-512MHz | 17dBm |
| N71: 600MHz | 617-652MHz | 663-698MHz | 17dBm |
| N28: 700MHz | 758-803MHz | 703-748MHz | 17dBm |
| N5: 850MHz | 869-894MHz | 824-849MHz | 17dBm |
| N20: 800MHz | 791-821MHz | 832-862MHz | 17dBm |
| N8: 900MHz | 925-960MHz | 880-915MHz | 17dBm |
| N66: AWS | 2110-2170MHz | 1710-1770MHz | 17dBm |
| N3: 1800MHz | 1805-1880MHz | 1710-1785MHz | 17dBm |
| N1: 2110MHz | 2110-2170MHz | 1920-1980MHz | 17dBm |
| N40: 2300MHz | 2300-2400MHz | 2300-2400MHz | 17dBm |
| N7: 2600MHz | 2620-2690MHz | 2500-2570MHz | 17dBm |
| N41: TD2600+ | 2496-2690MHz | 2496-2690MHz | 17dBm |
| N78: 3500MHz | 3300-3800MHz | 3300-3800MHz | 17dBm |
| N77: 4000MHz | 3800-4200MHz | 3800-4200MHz | 17dBm |
- Digital bandwidth-adjustable features allow for seamless adaptability to different frequency bands
- LCD display for input/output signal strength monitoring
- Auto isolation detection
- Improve any three mobile networks simultaneously
- Built-in Auto Gain Control (AGC) & Auto Level Control (ALC)
- Center frequency movable
- OMS Lite for remote/local control and monitoring (Optional)
Founded in 2010, ATNJ has grown into an RF-focused manufacturer backed
by a large team of senior engineers. Our setup includes:
- Manufacturing headquarters in Shenzhen
- Branch office in Guiyang
- Digital development center in Xiamen
- Dedicated AI algorithm team for customization
Our R&D team specializes in communications, RF, software defined radio
(SDR), hardware design and customized AI algorithms. We are committed to
the R&D, production and sales of:
- SDR platforms
- Digital LTE/NR repeaters
- Power amplifiers
- RF modules and passive RF components
- Communication network optimization solutions
We also undertake turnkey projects covering RF design, digital repeaters,
digital DAS systems, and indoor/outdoor signal coverage.
As an OEM/ODM RF manufacturer, our core business is supplying professional
repeater solutions to overseas partners and providing the technical support
behind them. All customized projects are handled under strict confidentiality:
most of our partners' devices carry their own branding and company
information, while being engineered and produced in our factory.
Ready to elevate your next project? Our R&D team is here to help you succeed.
Get in touch today:
Whatsapp: +8618813582037
-
AIt works great, the frequency can be adjusted to Vodafone correctly,and LTE speed goes fast.
-
S빠른 배송..신속한 소통 .요구사항에 대한 빠른 회신
-
BTo deal with ATNJ has been a pleasure because of the clever and special attention from Emma to assist me when our local post office neglected to make the delivery, Emma had better local information than me here in Australia. Because I live in a remote valley the local signal is very weak and the nearest tower is 20Km away. The ATNJ product has been excellent and delivers a stronger signal than two other well known products that I have tried. I am very effetively using two indoor antennas to cover down and upstairs The design is neat and effective and the instructions well describe how to instal and best practice. I can recommend this product with no hesitation.
