800MHz Lte 4g Repeater Amplifiers Cellular Network Signal Booster 70dBi
| Frequency Range: | 791-821MHz/832-862MHz | Repeater Gain: | 70dBi |
| Repeater Output: | 17-20dBm | Color For Choice: | White,Blue,Customized |
| AGC Intelligent function: | Done,31dB @ 1dB/ Step | RF Connect Type: | SMA/Female Connector |
| Power Supply: | AC 110~220V±20%, 50/60Hz(AC 220V/ DC5V/2A Power Adapter) | Inter-Modulation Attenuation ACPR: | ≤ -40dBc / 30kHz (measured Under Rated Output Power) |
| Packing size: | 54x19x16cm | Products type: | 4G Repeater, Amplificador Celular |
| High Light: | BV 4G Signal Repeater,TUV Cellular Network Signal Booster,70dBi 4G Signal Repeater |
||
800MHz LTE 4g repeater amplificateurs signal cellulaire network signal boaster
A cell phone booster is a device that gathers the signal from the air, usually through an outdoor unit (such as an antenna), and “conveys” this signal to an indoor unit that is supposed to boost the signal. This conveying is done through a wired connection between the outdoor antenna and the indoor unit. The indoor cell phone booster, in turn, is provided with external power through a power outlet and has a complex circuitry that allows it to amplify the weak signal that has been received by the outdoor antenna. The indoor unit then sends the electrical signal to the indoor antenna that is directly connected to the unit, and the antenna converts the electrical signal to waves of the same frequency as were received by the outdoor unit. This, the frequency range of the waves does not change, and the cell phones do not notice any difference, except for a dramatic increase in the signal power that they are receiving.
Thus, as we can see, cell phone signal boosters are devices that literally boost the cell phone signal that you are receiving. This is done through some complex circuitry that works through the use of external power and boosts the signal to usable levels.
-
ATNJ Band20 800MHz mobile signal repeater
-
Selling Point
Automatic dormancy when no user make the calling .
④Automatic adjust the system gain to avoid the repeater self-excitation .
⑤Initiative reminding when the device was damaged .
⑥Supports from 0.2 to 20MHz bandwidth adjusted(Customized) .
Supports 5G bandwidth, 40MHz,50MHz,60MHz,70MHz,80MHz,90MHz,100MHz(Frequency Bandwidth Customized) .
⑦With WIFI Monitor+Control(Customized),NMS(network management system),Function Optional .
Further detail pls click here for downloading the products specification:
Single band LTE 800MHz RF Repeater.pdf

















