ATNJ Smart Display 2G 3G 4G Signal Booster with 70dB Gain & WiFi Monitoring
| Type: | 4G Signal Booster | Network: | GPRS, 4g, GSM, 3G |
| Frequency: | GSM/ DCS/CDMA/WCDMA | Gain: | 65dB |
| AGC ALC Intelligent Function: | Done | Max. Output power: | 15~27dBM |
| Coverage: | 100-300sqm | Weight: | Approx 0.5kg |
| Size: | 150*115*27 | Application: | Home,office, Apartments,basement,shopping Mall, Parking ...ect. |
| Material: | ABS Plastic | Warranty: | 3 Years |
| High Light: | 4G signal booster with WiFi monitoring,Smart display signal booster 70dB gain,2G 3G 4G mobile signal amplifier |
||
| Attribute | Value |
|---|---|
| Type | 4G signal booster |
| Network | GPRS, 4g, GSM, 3G |
| Frequency | GSM/DCS/CDMA/WCDMA |
| Gain | 65dB |
| AGC ALC Intelligent Function | Done |
| Max. Output power | 15~27dBM |
| Coverage | 100-300sqm |
| Weight | Approx 0.5kg |
| Size | 150*115*27 |
| Application | Home, office, apartments, basement, shopping mall, parking, etc. |
| Material | ABS Plastic |
| Warranty | 3 Years |
| Frequency Range (Customers to Choose) | |
|---|---|
| Uplink | 880-915MHz |
| Downlink | 925-960MHz |
| Frequency Bandwidth (3dB Bandwidth) | 35MHz |
| Gain | 70dB |
| Automatic gain control (Step Attenuation) | 31dB @ 1dB/ Step |
| Auto Gain Control | 20dB Min. |
| Output Power(Customers to Choose) | 20dBm |
| Spurious Emission | ≤ -15dBm/30kHz 9kHz~1GHz: ≤ -36dBm/30kHz 1GHz~12.75GHz: ≤ -30dBm/30kHz |
| Inter-Modulation Attenuation ACPR | ≤ -40dBc / 30kHz (measured under rated output power) |
| In-band Ripple | ≤ 3dB |
| VSWR | <=2 |
| I/O Impedance | 50 Ω |
| Noise Figure | ≤ 5dB |
| System Delay | ≤ 5μs |
| RF Connector(Customers to Choose) | SMA (Female) |
| Operating Temperature | Operation: -10°C ~ +55°C / Storage: -20°C ~ +60°C |
| Power Supply | AC 110~220V±20%, 50/60Hz(AC 220V/ DC5V/2A power adapter) |
| Dimensions | 165*130*40 (mm) |
| Weight | ≤0.8 kg(Net) |
| Alarm Monitoring System | Alarm for uplink self-oscillation |
| Indication LED | Power supply |
2022 new upgraded Micro power smart single band signal repeater for residential use with WIFI monitoring and control function, it could cover 100-300sqm (standard kit), and could support max 2 to 3 indoor antennas to cover over 800sqm. Analog repeater and Digital(Customized Selected Band) repeater for Choice.
- Intelligent to guide the installation with LCD
- Real time display the signal strength
- Automatic dormancy when no user make the calling
- Automatic alarm when installation mistake and provide the according solution
- Automatic adjust the system gain to avoid the repeater self-excitation
- Initiative reminding when the device was damaged
- Supports 10MHz from 0.2 to 10MHz bandwidth adjusted (Customized)
We are factory, with trading service. We provide OEM/OEM service.
Yes, we welcome sample order to test and check quality. MOQ is 1 for normal products.
Yes. We have a user manual and support technical support 24/7.
We promise 3-year warranty for all products shipped from us. Man-made sabotage and natural factors are not within the scope of warranty.
-
Ac’est une bonne qualité
-
SI have bought these products before, and I have had no problems, they are of very good quality.
-
ALivraison dans un délai acceptable par voie aérienne. Qualité : j'attends d'installer totalement l'appareil.
