When the data signal grid is lower than 3 bars, everyone will involuntarily feel that the current data signal is not good, maybe this is not the case.
For example, are in the elevator, some people's mobile phone signal has 1 bar can still chat and talk on the phone, maybe the 3 data signals of the mobile phone icon sent to WeChat Moments but always can not be forwarded.
There are many such reasons that occur, but one misconception must be corrected first, and the data signal grid does not necessarily represent the mobile phone signal. Each mobile phone has a different optimization algorithm for the data signal grid, which is why the above situation occurs. Even if the data signal grid does not represent the mobile phone signal, what are the uses of the mobile phone signal grid?
The original intention of the data signal grid setting is to indicate the current data signal status of the mobile phone, and the Internet will select the best communication frequency and entrance for the mobile phone.
If you choose a mobile phone that is suitable for multi-frequency points in areas with more people, the mobile phone signal will jump to the frequency point where the number of access times is relatively small. Therefore, even if consumers' mobile phones use the same network operators and are connected to the same mobile phone towers as the mobile phones of ordinary users in the surrounding areas, the number of data signal grids indicated on the mobile phone may not be the same.
In terms of removing external influences, a large number of data signal grids do represent better data signals, in fact, the number of data signal grids is only for reference, and cannot be used as a specification to judge the advantages and disadvantages of data signals.
Mobile phone signal booster|How does the mobile phone signal grid change?
The key to the change of the mobile phone signal grid lies in the data signal optimization algorithm embedded by the manufacturer for the mobile phone signal, and the key to the change of the data signal grid is the refresh rate of the data signal optimization algorithm. If the data signal update optimization algorithm embedded in the mobile phone is very fast, the data signal changes rapidly, and vice versa, the data signal changes slowly. This means that if ordinary people use the mobile phone signal grid to find the part of the data signal and better data signal, it is very likely to waste a lot of time.
The above problems our professional mobile phone signal booster manufacturers recommend that you use our ATNJ mobile phone signal booster can easily solve these problems.
Shenzhen ATNJ Communication Technology Co.,LTD is a professional organization specializing in solving mobile phone signal poor, mobile phone signal booster and mobile phone voice communication faults for factories, hotels, villas, clubs, bars and other social places, serving Guangdong Province.
