ANT-Signal DAQ
Introducing high-speed transceivers and high-end FPGAs, dedicated to multi frequency, high bandwidth and other scenarios, applied in 5G and LTE wireless transmission, cable TV access, testing and measurement, failure warning, phased array radar and other high-performance RF application scenarios.
Main Features
ANT-Signal DAQ is a core board for wireless RF data sampling and conversion development board and supporting development platform. The core board adopts chips from well-known domestic and foreign brands, including AMD's Artix UltraScale+XCAU15P-FFVB676-2-I FPGA, Taorun 8T8R RF direct sampling RF transceiver TR7165b, Zhaoyi Innovation GD32F425 ARM, ADI AD9528 clock management chip, power supply, memory, and Flash. The board has a Gen4.0 x4 PCIE interface and four SFP+optical module interfaces.
This development platform supports 8 channels of 14 bit ADC with a maximum sampling rate of 3GSPS, 8 channels of 14 bit DAC with a maximum sampling rate of 12GSPS, achieving 400MHz~8000MHz RF direct sampling, reducing the complexity of RF signal processing links and having lower power consumption. Meet the requirements of 5G and LTE wireless technology, phased array radar, unmanned aerial vehicle countermeasures, monitoring, prevention, control, and other high-performance RF applications.
Product Architecture
Product Specifications
| FPGA |
Artix UltraScale+ XCAU15P-FFVB676-2-I |
|
Built-in storage
|
128Mbit QSPI storage for FPGA startup
|
|
FPGA RAM
|
DDR4 supports 16 bit 2400MHz and 4Gb capacity
|
|
Device Interface
|
Directly connected through PCIE and FPGA, supporting PCI-E Gen4.0
|
|
SFP port
|
4x16G SFP+optical port
|
|
Clock Interface
|
Onboard 50MHz crystal oscillator, used as a conventional clock source for FPGA;
Onboard AD9528 clock management chip, capable of outputting up to 12 clock channels
On board differential crystal oscillator 156.25MHz, for FPGA SerDes reference, used for 10 Gigabit Ethernet
On board differential crystal oscillator 125MHz, for FPGA SerDes reference, used for PCIE interface
|
|
Expand Peripheral Interface
|
USB to serial port, RS485 interface for ARM external parameter handover
JTAG is used for FPGA online debugging
|
|
Cooling System
|
Metal aluminum plate for heat dissipation, the chip conducts heat to the bottom plate through silicone gel for heat dissipation
|
|
Management Controller
|
Voltage, current, and temperature monitoring
Power timing management and reset
FPGA configuration and control
Clock configuration
Prevent copying configuration files
|
| Power Supply |
On board power supply for PCI-E slot
Support+24V DC power supply
Maximum power consumption 40W
|
|
Usage environment
|
-40 ℃ to 85 ℃
|
|
Quality
|
Manufacturing standards comply with IPC-A-6102
Compliant with RoHS standards
|
|
Size
|
|
Software package/board level support
Firmware loading
Firmware upgrade
Host managemen
Standard demonstration program
Ordering Information
|
Product NO.
|
ATNJ-DAQ-15P-7165 |
|
Model NO.
|
Atnj Signal DAQ |
|
Description
|
The core board of the wireless RF data sampling, conversion, and transmission development platform is developed based on FPGA XCAU15P, which can load a super wide bandwidth RF transceiver of up to 3.2G,
|
Your message must be between 20-3,000 characters!
