tuv gsm signal booster
"
2G 3G 4G三バンド中継器
2G 3G 4G Tri Band Repeater Full intelligent 2G 3G 4G Mobile Signal Booster 900/1800/2100MHz Cellular amplifier GSM LTE signal repeater kit Specification: Frequency Uplink Downlink GSM 900MHz 890-915MHz 935-960MHz 4G 1800MHz 1710-1785MHz 1805-1880MHz 3G 2100MHz 1920-1980MHz 2110-2170MHz Max. Gain 68dB±2dB 65dB±2dB Max. Output Power 17dB±2dB 20dB±2dB Bandwidth Wide Band Ripple in Band ≤ 8dB Noise Figure ≤ 6dB VSWR ≤ 2.0 Spurious Emission 9KHz~1GHz ≤ -36dBm 1~12.75GHz ≤ -30dBm
カスタマイズされたデジタルバンド選択リピエーター マルチサブバンド 900 1800 2100MHz
Multi sub-band 900 1800 2100MHz Customized digital band selective repeater Selling Point ① Intelligent to guide the installation with LCD ② Real time display the signal strength. Automatic dormancy when no user make the calling . ③ Automatic alarm when installation mistake and provide the according solution . ④ Automatic adjust the system gain to avoid the repeater self-excitation . ⑤ Initiative reminding when the device was damaged . ⑥ Supports from 0.2 to 20MHz bandwidth
半二重2.4GHz 2ワット33dBm WIFIの中継器のアンプの高い発電
High Power 2.4GHz 2 Watt 33dBm WIFI Repeater Amplifier ATNJ's family of WiFi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Can be used any 2.4GHz antenna that implements an N-Male connector. The
ATNJ工学2ワット33dBm 5.8GHz WIFIの中継器のアンプの高い発電
High Power 5.8GHz 2 Watt 33dBm WIFI Repeater Amplifier ATNJ's family of WiFi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Can be used any 5.8GHz antenna that implements an N-Male connector. The
高い発電2のワット33dBm 5.8GHz WIFIの中継器のアンプBVは承認した
High Power 5.8GHz 2 Watt 33dBm WIFI Repeater Amplifier ATNJ's family of WiFi boosters is designed for use in mobile and/or mesh wireless networking applications. Designed for bi-directional signal amplification, In contrast, traditional analog amplifier technologies can go into saturation or reduce transmit power as input signal fluctuates, negatively impacting signal quality and network performance. Can be used any 5.8GHz antenna that implements an N-Male connector. The
