- Key words:GSM 4G mobile signal booster, signal repeater, signal amplifier
- Suitable:global applicatioin for home/office/apartment... use
- Frequency:824-849MHZ /869-894MHz ,1710-1755MHZ/2110-2155MHZ
- Cellular Networks:2g/3g/4g
- size:225x140x35 (mm)
- Warranty:3 Years
- Place of Origin:CN;GUA
- Model Number:ATNJ-DB850/ AWS
- Type:2/4G mobile signal booster, signal repeater, signal amplifier
- Brand Name:ATNJ mobile signal booster, signal repeater, signal amplifier
Global application ATNJ factory DUAL BAND 850/AWSMHZ 2G/3G/4G mobile signal booster
DUAL BAND Pico signal repeater is applied specifically in small area indoor DAS system. The base station signal is coupled and amplified by Pico signal repeater into in building system. The amplified signals is transmitted by indoor antenna. Meanwhile the indoor antenna receives the cell phone signal, and send the signal to the base station as uplink. This method can eliminate the signal dead spot, reject the interference, provide the stable signal communication for cell phone users. This Pico signal repeater mainly solves the problem spot problem in building. The coverage area is as large as 3000 square meters in open space, and 1000 square meters in partial obstacle area, 500 square meters in complete obstacle area. The edge power level for coverage area is above 85dBm. The signal repeater output power level is less than 20dBm.
Pico signal repeater is a bi-directional amplifier that allows for the reception of signals, amplifies the signal and re-transmits into areas where there is no or very low signal level coverage enabling a mobile user to establish a call connection.
Pico signal repeater can be deployed in indoor coverage and dead area. It is especially advantageous to use in 100M2-1000M2,which is a very economical solution. The signal repeater output power is up to 20dBm per carrier.
Meanwhile, it can also boost the speed of GPRS.
1,GSM900&3G 2100MHZ BOOSTER ×1
mobile signal booster Specification
FrequencyRange (Customers to Choose)
Frequency Bandwidth (3dB Bandwidth)
Automatic gain control (Step Attenuation)
31dB @ 1dB/ Step
Auto Gain Control
Output Power(Customers to Choose)
9kHz~1GHz: ≤ -36dBm/30kHz
1GHz~12.75GHz: ≤ -30dBm/30kHz
Inter-Modulation Attenuation ACPR
≤ -38dBc / 30kHz (measured under rated output power)
Voltage Standing Wave Ratio
RF Connector(Customers to Choose)
Operation: - 10°C ~ + 55°C / Storage: -20°C ~ +60°C
AC 220V±20%, 50/60Hz(AC 220V/ DC9V/9A power adapter)
Alarm Monitoring System
Alarm for uplink self-oscillation
Power supply, Run,Alarm
1,Intelligent to guide the installation with LCD
2,Real time display the signal strength.
3,Automatic dormancy when no user make the calling
4,initiative reminding when device damaged
5,Automatic detect the installation mistake and provide the corresponding solution with LCD